Guardian密封系统
为关键接头、连接和界面提供的先进密封解决方案——防止高风险连接点处的水分和污染物进入。
保护涂层无法到达的区域
工业和海洋系统中连接处、法兰和机械接头处的腐蚀是公认的完整性风险——特别是在传统涂层在界面和缝隙处留下间隙的地方。Guardian密封系统专门设计用于消除这些高风险点处的水分和污染物进入。
JST Group作为综合腐蚀防护计划的一部分，供应和应用Guardian密封系统——将密封与涂层、阴极保护和腐蚀监测相结合，以提供完整的资产保护。
为什么选择Guardian密封系统？
腐蚀不会在涂层边缘停止——密封系统保护涂层单独无法解决的关键间隙和界面。
防止水分进入
密封关键连接点和界面，防止水分、氧气和污染物进入——消除缝隙腐蚀的主要驱动因素。
支持腐蚀防护策略
作为综合腐蚀防护计划的一部分发挥作用——密封传统涂层无法到达的间隙。
易于施工
专为现场应用于关键资产而设计——包括螺栓连接、法兰和机械接头——无需专业设备。
化学和环境耐受性
耐工业化学品、海水和油气及海洋环境中常见的侵蚀性大气条件。
密封系统的应用领域
法兰密封
对螺栓法兰和管道连接进行密封，防止水分和污染物进入法兰面间隙。
机械接头
保护易受缝隙腐蚀的螺纹连接、耦合器和机械接口。
高风险连接点
工艺系统中的关键点，其中连接处腐蚀可能造成安全或完整性风险。
结构界面
钢对钢和钢对混凝土界面的密封，防止水分滞留导致的加速腐蚀。
我们如何交付
集成密封服务——从产品选择到专业现场应用，作为完整腐蚀防护计划的一部分。
产品选择
评估接头类型、运行条件和环境，以选择正确的密封系统和应用方法。
专业应用
由经过培训的技术人员进行应用——确保完全覆盖接头界面并密封间隙和缝隙。
集成
密封系统与更广泛的腐蚀防护计划相集成——包括涂层、阴极保护和监测。
文档记录
每个处理连接点的完整应用记录、照片文档和检验签字。
系统概览
Guardian密封系统专为现场应用于关键连接点而设计——以完整密封套件形式供应，配有清晰的应用说明，确保一致的效果。
综合腐蚀防护解决方案
- 授权的Guardian应用商——产品和安装来自同一源头
- 密封与涂层、阴极保护和监测计划相集成
- 现场团队具有识别和处理高风险连接点的经验
- 提供完整的文档和检验记录
- 在东南亚、中东和非洲积极开展业务
Guardian密封产品数据表
下载Guardian密封产品系列的技术数据表。
Guardian ELASTOSHIELD
Facades, Roofs, Wet Areas & Concrete Decks
A single-component, water-based 100% acrylic copolymer elastomeric waterproofing membrane for facades, roofs, walls, wet areas, and concrete decks.
- Application Temp
- 5°C to 40°C
- Elongation
- >500% (ASTM D412)
- UV Resistance
- No effect after 5,000 hours
- Shelf Life
- 12 Months
- Highly flexible — accommodates movement and minor cracking across a wide range of substrates
- Excellent UV, weathering, and CO₂ resistance — proven track record of over 30 years
- Heat reflective — white formulation reflects 80% of solar energy, reducing energy costs
- Safe, water-based, non-flammable formulation — no solvents, no pungent smell, easy water cleanup
- Warranties available for 5, 10, or 15 year periods against leaks caused by normal weathering
Guardian FB 1000 Tape
Above Ground / Structural Steel & Tank Chimes
A cold-applied butyl tape overwrap system with needle-punched fleece backing for above ground corrosion protection of pipes, structural steel, and tank chime sealing.
- Total Thickness
- 1.00 mm
- Application Temp
- 0°C to 45°C
- Max Service Temp
- 80°C
- Peel Adhesive Strength
- 27 N/25mm
- Strong bond and impervious seal — fast and easy above ground installation with no special equipment required
- High tack grey butyl adhesive — conforms to irregular shapes with consistent uniform thickness
- UV resistant and applicable over a wide temperature range
- Fleece backing compatible with Guardian Elastoshield or alternative 100% solid topcoats
Guardian Tank Boot Sealing System (TBSS)
Above Ground / Storage Tank Base Sealing
A multi-layer corrosion protection and waterproof sealing system for storage tank bases, suitable for new installations and refurbishment of existing tanks.
- System Layers
- 6-product multi-layer system
- Surface Prep Standard
- ISO 8501-1 St2
- Topcoat
- Guardian Elastoshield Acrylic (2 coats, 500–750 microns each)
- Overlap Requirement
- Minimum 50mm between tape layers
- Comprehensive corrosion and waterproof protection for tank base-to-concrete interface — new build and refurbishment
- Multi-layer system with petrolatum and butyl chemistries provides redundant barrier protection
- FB1000 fleece-backed tape accepts Elastoshield topcoat for UV and weather resistance
- Minimal surface preparation required — power wire brush to ISO 8501-1 St2, no blasting needed
Petrolatum Primer (Hi-Tack)
Tank Boot Sealing / Above Ground Corrosion Protection
A petrolatum compound incorporating inert fillers and corrosion inhibitors, serving as the key first-layer primer in the Guardian Tank Boot Sealing System.
- Application Temp
- -10°C to +50°C
- Service Temp
- -10°C to +75°C
- Coverage
- 5 m²/kg (average)
- Petrolatum Content
- 75% min by weight
- Key primer component of the Guardian Tank Boot Sealing System — inert, stable, and plastic across a wide temperature range
- Profiles minor surface imperfections for uniform application of petrolatum mastic and tape
- Manufactured in accordance with AWWA Standard C217-14
- Service life and shelf life both exceeding 30 years
| 系统 | Application Temp | Elongation | UV Resistance | Shelf Life |
|---|---|---|---|---|
| Guardian ELASTOSHIELD | 5°C to 40°C | >500% (ASTM D412) | No effect after 5,000 hours | 12 Months |
| Guardian FB 1000 Tape | 1.00 mm | 0°C to 45°C | 80°C | 27 N/25mm |
| Guardian Tank Boot Sealing System (TBSS) | 6-product multi-layer system | ISO 8501-1 St2 | Guardian Elastoshield Acrylic (2 coats, 500–750 microns each) | Minimum 50mm between tape layers |
| Petrolatum Primer (Hi-Tack) | -10°C to +50°C | -10°C to +75°C | 5 m²/kg (average) | 75% min by weight |
需要帮助选择合适的系统？ 与我们的工程团队联系 →