Norriseal™ pressure controllers

40 years in Thailand & South East Asia


	Products & Services Advanced Inspection Services CAD Services Corrosion Control Services Cathodic Protection & AC Mitigation Coatings & Surface Preparation Corrosion Inhibiting Injection Systems Internal Corrosion Monitoring Heat Treatment Services Human Resource & Manpower Outsourcing Manpower Recruitment Training & Documentation Specialist Equipment Services BAC PIN BRAZING Cold Cutting Coupon / Probe Retrieval Services CP EQUIPMENT HACCS ROHRBACK COSASCO WACHS Specialist Equipment Supply Electrical & Instrumentation Marine Offshore Accommodation Piping & Process Pumps Rotating Equipment Screens Supports & Spacers Valves Home > Industry Segments > Mining > Norriseal™ pressure controllers Norriseal™ pressure controllers Simple-to-operate, pneumatic pressure controllers sense pressure in a variety of applications and modes. Series 4300 Pneumatic Pressure Controller Simple-to-operate, pneumatic pressure controller that senses pressure with a 316 SST Bourdon tube. Ideal for installations requiring rugged construction, dependable operation and a minimum of parts. Control options include throttle, throttle with low-cutout, and snap Bourdon tube pressure ratings up to 7,500 psig Field-reversible controller action Orifice sizes to accommodate most actuators Series 4400, Type 72-44 Pneumatic indicating pressure controller driven by either a 316 SST Bourdon tube (NI-span C or 316 SST diaphragm capsule) or Buna-N slack diaphragm process pressure sensing elements. Also available as a pressure transmitter. Pressure ranges from vacuum to 5,000 psig 100% and 200% proportional band control Four different outputs: 3 to 15 psig, 3 to 27 psig, 6 to 30 psig and adjustable differential gap Direct visual set point accurate to within 1.5% Series 4700A Pneumatic Pressure Controller Pneumatic-operated unit that provides pressure control in proportional only, proportional plus integral (reset), differential gap, or transmitter modes. Standard pressure ratings up to 10,000 psig with 316 SST Bourdon tube sensing elements. Field-reversible direct or reverse action Ambient operating temperature range -40°F to 160°F (-40°C to 71°C) Weather-resistant aluminum enclosure Optional over-travel stop, anti-reset windup, diaphragm seal, differential pressure cell and remote set point Series 1631 Pressure Controller The Norriseal Model 1631 pressure controller receives a 4-20mA (10-50mA) signal from a remotely-mounted pressure transmitter and provides proportional plus integral control for a valve positioner or other final control element via a seconf 4-20 mA (10-50 mA) current loop. The control loop also provides power for the controller that operates as a two-wire device; the input loop is optically isolated from the controller to prevent ground loop problems. The system is designed to be intrinsically safe for operation in Class 1, Div. 1 areas when installed with appropriate barriers. An LCD display provides local indication of the setpoint, proportional and integral control constants and the actual pressure being read from the input loop. A simple three-button keypad is used to program the constants and to calibrate both the input and control current loops. All calibration data is stored in non-volatile EEPROM memory; no battery is required.